<?xml version="1.0" ?>
<rss version="2.0">
	<channel>
		<title>Grow Force</title>
		<link>http://www.growforce.co.uk</link>
		<description> GrowForce.co.uk are suppliers of hydroponics systems, CANNA Nutrients and grow lights </description>
		<pubDate>Tue, 06 Jan 2009 07:58:06 +0000</pubDate>
		<generator>Rhino RSS Generator</generator><item>
			<title><![CDATA[ProGrow Ballast]]></title>
			<link>http://www.growforce.co.uk/products/1302/progrow-ballast.html</link>
			<pubDate>Thu, 03 Jul 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[The PROGROW range offers a new level of safety in the lighting market with higher ballast efficiency and better reflective pattern reflectors. 

Using the highest quality materials and the most advanced manufacturing processes, the PROGROW range is built to perform year after year at the highest levels and is mail order friendly as all items come boxed and protected. 

Packed with numerous features including the patented fully adjustable cord set, the PROGROW range of ballast and reflectors are cool running, compact and lightweight for the ultimate in convenience. 

They are hard wired and have integral heat shields to reduce the risk of burnouts. 

All of the PowerPlant ballast range are individually tested for both earthing and continuity and are CE marked. 

We offer a 3 year (limited) warranty on all choke and igniter components providing the units have not been tampered with and are returned in good condition with plug lead. 

The louvred fin design ensure these quiet running units are cool running. They are compatible with POWERPLANT PROGROW SERIES reflectors. 

Yes - your plants will grow faster with our aptly named POWERPLANT LIGHTS. 
400w PowerPlant PRO Ballast & Cord Set 600w PowerPlant PRO Ballast & Cord Set]]></description>
		</item><item>
			<title><![CDATA[PowerPlant Hobby]]></title>
			<link>http://www.growforce.co.uk/products/1301/powerplant-hobby.html</link>
			<pubDate>Thu, 03 Jul 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[All are complete systems. Hobby reflectors with PowerPlant HOBBY Ballast are hard wired for safety with 4m cables to reflector and bulb.

All lamps supplied are PowerPlant High Pressure Sodium lamps. 

5% lower amp usage than its competitors in the value market means a saving on your electric bill.

Running currents: 250w 1.33 Amps 400w 1.9 Amps 600w 2.85 Amps]]></description>
		</item><item>
			<title><![CDATA[Heat Shield]]></title>
			<link>http://www.growforce.co.uk/products/1300/heat-shield.html</link>
			<pubDate>Tue, 01 Jul 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[Our Heat shields carefully re-distribute light and heat away from the central 'hot spot' created beneath all horizontally mounted lamps thus allowing you to place your light closer to your plants resulting in massive gain in light intensity.]]></description>
		</item><item>
			<title><![CDATA[pHix-!t]]></title>
			<link>http://www.growforce.co.uk/products/1299/phix-t.html</link>
			<pubDate>Tue, 01 Jul 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[pHix-!t will fix the pH of your tank simply add to your nutrient and it will keep the ph at 6.0 for 7-10 days .]]></description>
		</item><item>
			<title><![CDATA[The Evolution CO2 controller & Sensor Complete Kit]]></title>
			<link>http://www.growforce.co.uk/products/1293/the-evolution-co2-controller--sensor-complete-kit.html</link>
			<pubDate>Thu, 26 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[The Evolution CO2 controller is one of the most advanced of its kind. 
It can be used either with or without the Evolution C02 sensor and can be interfaced to an external thermo/hygro stat providing a cheap entry-level system with an easy and affordable upgrade path in the future. 
The Evolution CO2 sensor utilises non-dispersive infra-red sensing technology for fast accurate CO2 monitoring.
This exquisitely designed sensor is highly accurate]]></description>
		</item><item>
			<title><![CDATA[Osmosis Machine 190 litre Reverse]]></title>
			<link>http://www.growforce.co.uk/products/1295/osmosis-machine-190-litre-reverse.html</link>
			<pubDate>Thu, 26 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[For some time we have been looking for a reliable RO machine and now we have found one. 
Our 4 stage professional 190 Litres per day unit is fitted with a pressure gauge and comes with a flush kit which helps extend the membrane's life.
This membrane will remove an average 97­99% of tap water contaminants. 
These professional systems have a large capacity DI filter that lasts 3-4 times longer than the in line type. The resin will last longer and is easier to change as the cartridge is refillable.
PRESSURE GAUGE
This system is fitted with a Pressure Gauge as we believe it is critical for system maintenance and problem solving. 
If you have a problem, the first thing you will be asked "What are the PSI readings?" GOOD REJECTION RATES AND RECOVER RATES ARE A RESULT OF GOOD PSI, AND 95% OF THE PROBLEMS ARE A RESULT OF POOR PRESSURE SOMEWHERE IN THE PROCESS.
THE KIT INCLUDES 
The system also has a flush kit fitted as standard. 
Flushing the membrane will extend its life.
1 X 50 US gallons per day self cleaning membrane 
1 X Flush Kit 
1 X Pressure Gauge 
1 X 5 micron sediment pre filter , X Solid carbon block filter 
1 X Refillable 01 Filter (POD) 
1 X Self piercing feed valve 
1 X Saddle clamp for the discharge water 
2 metres of Green tubing. 2 metres of Blue tubing. 
2 metres of Red tubing 
1 x Filter Wrench]]></description>
		</item><item>
			<title><![CDATA[The Intelligent Cycle Timer]]></title>
			<link>http://www.growforce.co.uk/products/1296/the-intelligent-cycle-timer.html</link>
			<pubDate>Thu, 26 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[An all new Cycle Timer for home and grow room use. The unit features a photocell that, when activated, will only enable the unit to operate in daylight or when lights are on. 
This enables the unit to automatically stop dosing when there is no light. 
A plastic housing, with wall mounting lugs, provides superior resistance to humid atmospheres for years of dependable service. 
The Cycle Timer is our most recent development in grow room controls and has solved the age old problem of accurate short cycle timing. 
Perfect for plant zone environments, reptile habitats or any other application requiring automatic short cycle switching. 
No programming is required. Easy to operate. Microprocessor time counter with pre-set frequency and duration. 
The Cycle Timer has many uses including fogging or misting, spray stakes or drip system timing, air pumps, C02 equipment and intake or exhaust fan control. 
The Cycle Timer has a range of pre-set 'On Times' and 'Cycle Times'. The 'On Times' vary from a minimum of 30 seconds to a maximum of 1 hour, with another 10 options in between and represent the amount of time the 'output' is actually on during the overall chosen Cycle Time. 
The 'Cycle Times' vary from a minimum of 1 minute to a maximum of 6 hours, with another 10 options in between and represent the overall Cycle Time. For example; if the Cycle Time is set for 1 hour and the On Time is set for 10 minutes the unit will power the chosen device for 10 minutes and will turn off the device for 50 minutes, giving an overall Cycle Time of 1 hour. 
The unit also features a Manual Override switch to enable the user to switch the device on continuously and supersede the set Cycle Time. This is useful in many applications, for example when wishing to run a pump for a longer period in order to saturate a chosen media. 
In override mode the unit ignores the photocell facility. 
The unit features a Light Sensor/Photocell that can be set to only dose during lights on or daylight conditions. 
When this feature is switched on, the unit will monitor light conditions and when it identifies darkness for any period exceeding 10 seconds, the timing function and output will stop. 
This feature is especially useful when using the unit to run dosing pumps or C02 devices, as it stops operating in hours of darkness without the grower having to think about it. 
There is an override switch to enable the photocell action to be disabled, making the unit also useful for fan operation etc. 
In case of incorrect setup by the grower, the unit features an Error Alert Light, that will flash if the On Time is equal to or greater than the Cycle Time. 
The Cycle Timer features a 3m mains lead and 13 amp fused plug and operates on 230 volts AC with a 13 amp switching capacity. 
The Cycle Timer must be plugged directly into a standard 13amp wall socket.]]></description>
		</item><item>
			<title><![CDATA[Reservoir Water Cooler]]></title>
			<link>http://www.growforce.co.uk/products/1297/reservoir-water-cooler-.html</link>
			<pubDate>Thu, 26 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[Reservoir Water Cooler Keep your solution cool In 
the hot summer.
Our chiller has a strong metal chassis with a housing of contemporary design, ensuring the chiller does not look 
out of place in any state of the art grow room, and to conform with current legislation our chiller uses the environmental friendly refrigerant R 134a. 
It benefits from a lower noise design, whilst the digital temperature controller ensures that the selected temperature is maintained at all times. 
The rate of flow is decided according to the output of the pump which can be 250-1200UH. 
Specification Power 
Voltage 
Frequency Working current Water refrigerated Iced medium 
Rate of flow Weight 
Size 
1110HP 220-240V 50Hz 
1.lA 50-400L R134a 250-1200UH 15Kg 
420 x 248 x 365mm 
]]></description>
		</item><item>
			<title><![CDATA[Oxydator  A( Medium)]]></title>
			<link>http://www.growforce.co.uk/products/1298/oxydator--a%28-medium%29.html</link>
			<pubDate>Thu, 26 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[A novel approach towards healthy oxygenated 
water and vigorous growth 
Supplying oxygen to the root zone is vital for promoting plant growth and health, however, adding air stones and air pumps into your system will not create pure oxygen bubbles as the air that we breathe contains only 21 % 0'. 
So imagine what micro fine pure 100% oxygen bubbles will do for your growth rates! Now you can be the first to try it with the Oxydator. 
The Oxydator produces oxygen through a specially developed ceramic catalyst in combination with Essentials OxyPlus, delivering 100% normal and activated oxygen in micro bubbles throughout your grow tank. 
These oxygen bubbles detoxify any harmful particles, keeping the water in your tank clean, healthy, free from harmful pathogens and cloudy residue. 
The Oxydator does not need electricity, it is silent and perfectly safe. 
The Oxydator can be used with organic additives as it preserves beneficial bacteria or enzymes, the Essentials OxyPlus is converted into 0' prior to its release from the capsule. (originally designed for fish so it is 100% safe) 
The Oxydator releases more oxygen when the water temperature in your reservoir rises thus giving your nutrient solution more oxygen when it needs it! 
You can control the amount of oxygen delivered to your plants by changing the dilution rate of Essentials OxyPlus you use in the Oxydator or by adding more or less catalyst pellets. 
It's simple to use, just purchase Oxydator A or Oxydator D and 1 bottle of Essentials OxyPlus and distilled water. 
Remove the acrylic container from the ceramic housing and fill the container with the desired amount of Essentials OxyPlus. 
Add the catalyst and turn to lock the ceramic housing. 
Finally, place the unit, with the ceramic cover face down, in the reservoir. 
The acrylic container will require filling up on every change of nutrient solution. 
Full instructions supplied!]]></description>
		</item><item>
			<title><![CDATA[Harvest-Master co/2 Easi]]></title>
			<link>http://www.growforce.co.uk/products/1286/harvest-master-co2-easi.html</link>
			<pubDate>Wed, 25 Jun 2008 00:00:00 +0000</pubDate>
			<description><![CDATA[Low cost,intelligent co2 enrichment control in one easy to use package from Harvest-Master.
scientifically proven optimum co2 levels preset, to suit a wide variety of herbs, flowers or fruiting crops.
So easy to use just plug in your co2 and watch it go.
Uses light sensors to start co/2 enrichment.
Has high temperature sensor to disable burner.
plug in options for cooling and fan control self learning and automatic calibration!
As soon as co/2 Easi is switched on,it learns how to co/2 enrichment works in your room,including whether you use bottle of burner.
Continuous learning and adjustment, all day ,everyday.
C02 EASi will understand, calculate and predict enrichment operations for optimum growth. 
BONUS FEATURE ... PERFORMANCE MONITORING!
Consumption: Automatic calculation and display of C02 consumption rate, with predicted bottle life remaining! 
Efficiency: Shows "Percentage of Optimum C02 Enrichment time" achieved! 
Automatic and continuous evaluation of cooling and exhaust systems efficiency. 
Identifies where improvements can be made for more growth, increased yield, reduced C02 use and lower electricity costs. 
C02 sensing and control, with advanced monitoring of grow room performance.
The use of the C02 EASI requires a C02 gas supply and regulator]]></description>
		</item></channel></rss>